I did not know that I had the option set to disable Squid ICMP pinger helper. MSS and MTU values are set to what the tunnel broker requires on the interface, can you also set the MTU inside of Squid configurations?
I enabled ping helper I show a good socket for my IPV6 interface address but every IPV6 only device shows NONE_NONE/409 on the Squid Access Table
I get the same result. How would I change MTU on Squid isn’t that set to auto discover with the HTTP port directive?
I also forgot to mention the IPV6 only device works when I have it set to not use the proxy.
Thanks again for the reply. It does work from IPV4 to IPV6 requests but never for IPV6 to IPV6 addresses or pure IPV6. I can disable the proxy and the system works for IPV6 to IPV6 only.
Here is my configuration I am testing..
# This file is automatically generated by pfSense
# Do not edit manually !
http_port 192.168.1.1:3128 ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=20MB cert=/usr/local/etc/squid/serverkey.pem tls-cafile=/usr/local/share/certs/ca-root-nss.crt capath=/usr/local/share/certs/ cipher=EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA384:EECDH+ECDSA+SHA256:EECDH+aRSA+SHA384:EECDH+aRSA+SHA256:EECDH+aRSA+RC4:EECDH:EDH+aRSA:HIGH:!RC4:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS tls-dh=prime256v1:/etc/dh-parameters.2048 options=NO_SSLv3
http_port 127.0.0.1:3128 intercept ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=20MB cert=/usr/local/etc/squid/serverkey.pem tls-cafile=/usr/local/share/certs/ca-root-nss.crt capath=/usr/local/share/certs/ cipher=EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA384:EECDH+ECDSA+SHA256:EECDH+aRSA+SHA384:EECDH+aRSA+SHA256:EECDH+aRSA+RC4:EECDH:EDH+aRSA:HIGH:!RC4:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS tls-dh=prime256v1:/etc/dh-parameters.2048 options=NO_SSLv3
https_port 127.0.0.1:3129 intercept ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=20MB cert=/usr/local/etc/squid/serverkey.pem tls-cafile=/usr/local/share/certs/ca-root-nss.crt capath=/usr/local/share/certs/ cipher=EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA384:EECDH+ECDSA+SHA256:EECDH+aRSA+SHA384:EECDH+aRSA+SHA256:EECDH+aRSA+RC4:EECDH:EDH+aRSA:HIGH:!RC4:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS tls-dh=prime256v1:/etc/dh-parameters.2048 options=NO_SSLv3
http_port [REDACTED:192::]:3128 intercept ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=20MB cert=/usr/local/etc/squid/serverkey.pem tls-cafile=/usr/local/share/certs/ca-root-nss.crt capath=/usr/local/share/certs/ cipher=EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA384:EECDH+ECDSA+SHA256:EECDH+aRSA+SHA384:EECDH+aRSA+SHA256:EECDH+aRSA+RC4:EECDH:EDH+aRSA:HIGH:!RC4:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS tls-dh=prime256v1:/etc/dh-parameters.2048 options=NO_SSLv3
https_port [REDACTED:192::]:3129 intercept ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=20MB cert=/usr/local/etc/squid/serverkey.pem tls-cafile=/usr/local/share/certs/ca-root-nss.crt capath=/usr/local/share/certs/ cipher=EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA384:EECDH+ECDSA+SHA256:EECDH+aRSA+SHA384:EECDH+aRSA+SHA256:EECDH+aRSA+RC4:EECDH:EDH+aRSA:HIGH:!RC4:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS tls-dh=prime256v1:/etc/dh-parameters.2048 options=NO_SSLv3
icp_port 0
digest_generation off
dns_v4_first off
pid_filename /var/run/squid/squid.pid
cache_effective_user squid
cache_effective_group proxy
error_default_language en
icon_directory /usr/local/etc/squid/icons
visible_hostname lee_family.home.arpa
cache_mgr jonathanlee571 at gmail.com
access_log /var/squid/logs/access.log
cache_log /var/squid/logs/cache.log
cache_store_log none
netdb_filename /var/squid/logs/netdb.state
pinger_enable on
pinger_program /usr/local/libexec/squid/pinger
sslcrtd_program /usr/local/libexec/squid/security_file_certgen -s /var/squid/lib/ssl_db -M 4MB -b 2048
tls_outgoing_options cafile=/usr/local/share/certs/ca-root-nss.crt
tls_outgoing_options capath=/usr/local/share/certs/
tls_outgoing_options options=NO_SSLv3
tls_outgoing_options cipher=EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA384:EECDH+ECDSA+SHA256:EECDH+aRSA+SHA384:EECDH+aRSA+SHA256:EECDH+aRSA+RC4:EECDH:EDH+aRSA:HIGH:!RC4:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS
sslcrtd_children 10
logfile_rotate 7
debug_options rotate=7
shutdown_lifetime 3 seconds
# Allow local network(s) on interface(s)
acl localnet src 192.168.1.0/27 REDACTED:192::/64
forwarded_for transparent
httpd_suppress_version_string on
uri_whitespace strip
acl block_hours time 00:30-05:00
ssl_bump terminate all block_hours
http_access deny all block_hours
acl getmethod method GET
#acl to_ipv6 dst ipv6
#acl from_ipv6 src ipv6
#tls_outgoing_options options=0x40000
#request_header_access Accept-Ranges deny all
#reply_header_access Accept-Ranges deny all
#request_header_replace Accept-Ranges none
#reply_header_replace Accept-Ranges none
#tls_outgoing_options cipher=HIGH:MEDIUM:!RC4:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS
tls_outgoing_options options=NO_SSLv3,NO_TLSv1,NO_TLSv1_1,NO_TICKET
#SINGLE_DH_USE,SINGLE_ECDH_USE
acl HttpAccess dstdomain '/usr/local/pkg/http.access'
acl windowsupdate dstdomain '/usr/local/pkg/windowsupdate'
#acl rewritedoms dstdomain '/usr/local/pkg/desdom'
#store_id_program /usr/local/libexec/squid/storeid_file_rewrite /var/squid/storeid/storeid_rewrite.txt
#store_id_children 10 startup=5 idle=1 concurrency=0
#always_direct allow all
#store_id_access deny connect
#store_id_access deny !getmethod
#store_id_access allow rewritedoms
#store_id_access deny all
refresh_all_ims on
reload_into_ims on
max_stale 20 years
minimum_expiry_time 0
refresh_pattern -i ^http.*squid.internal.* 43200 100% 79900 override-expire override-lastmod ignore-reload ignore-no-store ignore-must-revalidate ignore-private ignore-auth
#FACEBOOK
#refresh_pattern ^https.*.facebook.com/* 10080 80% 43200
#FACEBOOK IMAGES
#refresh_pattern -i pixel.facebook.com..(jpg|png|gif|ico|css|js|jpg?) 10080 80% 43200
#refresh_pattern -i .akamaihd.net..(jpg|png|gif|ico|css|js|jpg?) 10080 80% 43200
#refresh_pattern -i facebook.com.(jpg|png|gif|jpg?) 10080 80% 43200 store-stale
#refresh_pattern static.(xx|ak).fbcdn.net.(jpg|gif|png|jpg?) 10080 80% 43200
#refresh_pattern ^https.*profile.ak.fbcdn.net.*(jpg|gif|png|jpg?) 10080 80% 43200
#refresh_pattern ^https.*fbcdn.net.*(jpg|gif|png|jpg?) 10080 80% 43200
#FACEBOOK VIDEO
#refresh_pattern -i .video.ak.fbcdn.net.*.(mp4|flv|mp3|amf) 10080 80% 43200
#refresh_pattern (audio|video)/(webm|mp4) 10080 80% 43200
#APPLE STUFF
#refresh_pattern -i apple.com/..(cab|exe|msi|msu|msf|asf|wmv|wma|dat|zip|dist)$ 0 80% 43200 refresh-ims
#apple update
#refresh_pattern -i (download|adcdownload).apple.com/.*.(pkg|dmg) 4320 100% 43200
#refresh_pattern -i appldnld.apple.com 129600 100% 129600
#refresh_pattern -i phobos.apple.com 129600 100% 129600
#refresh_pattern -i iosapps.itunes.apple.com 129600 100% 129600
# Updates: Windows
refresh_pattern -i microsoft.com/..(cab|exe|msi|msu|msf|asf|wma|dat|zip)$ 4320 80% 43200 refresh-ims
refresh_pattern -i windowsupdate.com/..(cab|exe|msi|msu|msf|asf|wma|wmv)|dat|zip)$ 4320 80% 43200 refresh-ims
refresh_pattern -i windows.com/..(cab|exe|msi|msu|msf|asf|wmv|wma|dat|zip)$ 4320 80% 43200 refresh-ims
refresh_pattern -i microsoft.com/.*.(cab|exe|ms[i|u|f]|[ap]sf|wm[v|a]|dat|zip) 4320 80% 43200
refresh_pattern -i windowsupdate.com/.*.(cab|exe|ms[i|u|f]|[ap]sf|wm[v|a]|dat|zip) 4320 80% 43200
refresh_pattern -i windows.com/.*.(cab|exe|ms[i|u|f]|[ap]sf|wm[v|a]|dat|zip) 4320 80% 43200
refresh_pattern -i .*windowsupdate.com/.*.(cab|exe) 259200 100% 259200
refresh_pattern -i .*update.microsoft.com/.*.(cab|exe|dll|msi|psf) 259200 100% 259200
refresh_pattern windowsupdate.com/.*.(cab|exe|dll|msi|psf) 10080 100% 43200
refresh_pattern download.microsoft.com/.*.(cab|exe|dll|msi|psf) 10080 100% 43200
refresh_pattern www.microsoft.com/.*.(cab|exe|dll|msi|psf) 10080 100% 43200
refresh_pattern au.download.windowsupdate.com/.*.(cab|exe|dll|msi|psf) 4320 100% 43200
refresh_pattern bg.v4.pr.dl.ws.microsoft.com/.*.(cab|exe|dll|msi|psf) 4320 100% 43200
#windows update NEW UPDATE 0.04
refresh_pattern update.microsoft.com/.*.(cab|exe) 43200 100% 129600
refresh_pattern ([^.]+.)?(download|(windows)?update).(microsoft.)?com/.*.(cab|exe|msi|msp|psf) 4320 100% 43200
refresh_pattern update.microsoft.com/.*.(cab|exe|dll|msi|psf) 10080 100% 43200
refresh_pattern -i .update.microsoft.com/.*.(cab|exe|ms[i|u|f]|[ap]sf|wm[v|a]|dat|zip) 525600 100% 525600
refresh_pattern -i .windowsupdate.com/.*.(cab|exe|ms[i|u|f]|[ap]sf|wm[v|a]|dat|zip) 525600 100% 525600
refresh_pattern -i .download.microsoft.com/.*.(cab|exe|ms[i|u|f]|[ap]sf|wm[v|a]|dat|zip) 525600 100% 525600
refresh_pattern -i .ws.microsoft.com/.*.(cab|exe|ms[i|u|f]|[ap]sf|wm[v|a]|dat|zip) 525600 100% 525600
#refresh_pattern ([^.]+.)?(cs|content[1-9]|hsar|content-origin|client-download).[steampowered|steamcontent].com/.*.* 43200 100% 43200
#refresh_pattern ([^.]+.)?.akamai.steamstatic.com/.*.* 43200 100% 43200
#refresh_pattern -i ([^.]+.)?.adobe.com/.*.(zip|exe) 43200 100% 43200
#refresh_pattern -i ([^.]+.)?.java.com/.*.(zip|exe) 43200 100% 43200
#refresh_pattern -i ([^.]+.)?.sun.com/.*.(zip|exe) 43200 100% 43200
#refresh_pattern -i ([^.]+.)?.oracle.com/.*.(zip|exe|tar.gz) 43200 100% 43200
#refresh_pattern -i appldnld.apple.com 43200 100% 43200
#refresh_pattern -i ([^.]+.)?apple.com/.*.(ipa) 43200 100% 43200
#refresh_pattern -i ([^.]+.)?.google.com/.*.(exe|crx) 10080 80% 43200
#refresh_pattern -i ([^.]+.)?g.static.com/.*.(exe|crx) 10080 80% 43200
acl https_login url_regex -i ^https.*(login|Login).*
cache deny https_login
range_offset_limit 512 MB windowsupdate
range_offset_limit 4 MB
quick_abort_min -1 KB
cache_mem 512 MB
maximum_object_size_in_memory 256 KB
memory_replacement_policy heap GDSF
cache_replacement_policy heap LFUDA
minimum_object_size 0 KB
maximum_object_size 512 MB
cache_dir diskd /var/squid/cache 64000 256 256
offline_mode off
cache_swap_low 90
cache_swap_high 95
acl donotcache dstdomain '/var/squid/acl/donotcache.acl'
cache deny donotcache
cache allow all
# Add any of your own refresh_pattern entries above these.
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|?) 0 0% 0
refresh_pattern . 0 20% 4320
#Remote proxies
# Setup some default acls
# ACLs all, manager, localhost, and to_localhost are predefined.
acl allsrc src all
acl safeports port 21 70 80 210 280 443 488 563 591 631 777 901 8080 3128 3129 1025-65535
acl sslports port 443 563 8080 5223 2197
acl purge method PURGE
acl connect method CONNECT
# Define protocols used for redirects
acl HTTP proto HTTP
acl HTTPS proto HTTPS
# SslBump Peek and Splice
# http://wiki.squid-cache.org/Features/SslPeekAndSplice
# http://wiki.squid-cache.org/ConfigExamples/Intercept/SslBumpExplicit
# Match against the current step during ssl_bump evaluation [fast]
# Never matches and should not be used outside the ssl_bump context.
#
# At each SslBump step, Squid evaluates ssl_bump directives to find
# the next bumping action (e.g., peek or splice). Valid SslBump step
# values and the corresponding ssl_bump evaluation moments are:
# SslBump1: After getting TCP-level and HTTP CONNECT info.
# SslBump2: After getting TLS Client Hello info.
# SslBump3: After getting TLS Server Hello info.
# These ACLs exist even when 'SSL/MITM Mode' is set to 'Custom' so that
# they can be used there for custom configuration.
acl step1 at_step SslBump1
acl step2 at_step SslBump2
acl step3 at_step SslBump3
acl banned_hosts src '/var/squid/acl/banned_hosts.acl'
acl whitelist dstdom_regex -i '/var/squid/acl/whitelist.acl'
acl blacklist dstdom_regex -i '/var/squid/acl/blacklist.acl'
http_access allow manager localhost
http_access deny manager
http_access allow purge localhost
http_access deny purge
http_access deny !safeports
http_access deny CONNECT !sslports
# Always allow localhost connections
http_access allow localhost
quick_abort_min 0 KB
quick_abort_max 0 KB
quick_abort_pct 95
request_body_max_size 0 KB
delay_pools 1
delay_class 1 2
delay_parameters 1 -1/-1 -1/-1
delay_initial_bucket_level 100
delay_access 1 allow allsrc
# Reverse Proxy settings
deny_info TCP_RESET allsrc
# Package Integration
url_rewrite_program /usr/local/bin/squidGuard -c /usr/local/etc/squidGuard/squidGuard.conf
url_rewrite_bypass off
url_rewrite_children 32 startup=8 idle=4 concurrency=0
# Custom options before auth
#host_verify_strict on
# These hosts are banned
http_access deny banned_hosts
# Always allow access to whitelist domains
http_access allow whitelist
# Block access to blacklist domains
http_access deny blacklist
# List of domains allowed to logging in to Google services
request_header_access X-GoogApps-Allowed-Domains deny all
request_header_add X-GoogApps-Allowed-Domains consumer_accounts
# Set YouTube safesearch restriction
acl youtubedst dstdomain -n www.youtube.com m.youtube.com youtubei.googleapis.com youtube.googleapis.com www.youtube-nocookie.com
request_header_access YouTube-Restrict deny all
request_header_add YouTube-Restrict none youtubedst
acl sglog url_regex -i sgr=ACCESSDENIED
http_access deny sglog
# Custom SSL/MITM options before auth
cachemgr_passwd disable offline_toggle reconfigure shutdown
cachemgr_passwd REDACTED all
eui_lookup on
acl no_miss url_regex -i gateway.facebook.com/ws/realtime?
acl no_miss url_regex -i web-chat-e2ee.facebook.com/ws/chat
acl CONNECT method CONNECT
acl wuCONNECT dstdomain www.update.microsoft.com
acl wuCONNECT dstdomain sls.microsoft.com
http_access allow CONNECT wuCONNECT localnet
http_access allow CONNECT wuCONNECT localhost
http_access allow windowsupdate localnet
http_access allow windowsupdate localhost
http_access allow HttpAccess localnet
http_access allow HttpAccess localhost
http_access deny manager
acl BrokenButTrustedServers dstdomain '/usr/local/pkg/dstdom.broken'
acl DomainMismatch ssl_error SQUID_X509_V_ERR_DOMAIN_MISMATCH
sslproxy_cert_error allow BrokenButTrustedServers DomainMismatch
sslproxy_cert_error deny all
acl splice_only src 192.168.1.8 #Tasha iPhone
acl splice_only src 192.168.1.10 #Jon iPhone
acl splice_only src REDACTEDIPV6:6383:14b3 #Jon iPhone
acl splice_only src 192.168.1.11 #Amazon Fire
acl splice_only src 192.168.1.15 #Tasha HP
acl splice_only src 192.168.1.16 #iPad
acl splice_only src REDACTEDIPV6f:8589:3922 #iPad
acl splice_only_mac arp REDACTEDMAC
acl splice_only_mac arp REDACTEDMAC
acl splice_only_mac arp REDACTEDMAC
acl splice_only_mac arp REDACTEDMAC
acl splice_only_mac arp REDACTEDMAC
acl NoSSLIntercept ssl::server_name_regex -i '/usr/local/pkg/reg.url.nobump'
acl NoBumpDNS dstdomain '/usr/local/pkg/dns.nobump'
#acl markBumped annotate_client bumped=true
acl active_use annotate_client active=true
acl bump_only src 192.168.1.3 #webtv
acl bump_only src 192.168.1.4 #toshiba
acl bump_only src 192.168.1.5 #imac
acl bump_only src REDACTEDIPV6:720b:5bdd #imac
acl bump_only src 192.168.1.9 #macbook
acl bump_only src 192.168.1.13 #dell
acl bump_only_mac arp REDACTEDMAC
acl bump_only_mac arp REDACTEDMAC
acl bump_only_mac arp REDACTEDMAC
acl bump_only_mac arp REDACTEDMAC
acl bump_only_mac arp REDACTEDMAC
ssl_bump peek step1
miss_access deny no_miss active_use
ssl_bump splice https_login active_use
ssl_bump splice splice_only_mac splice_only active_use
ssl_bump splice NoBumpDNS active_use
ssl_bump splice NoSSLIntercept active_use #tested without MAC match
#ssl_bump bump bump_only_mac bump_only active_use
ssl_bump bump bump_only active_use
#acl activated note active_use true
#ssl_bump terminate !activated
#acl markedBumped note bumped true
#url_rewrite_access deny markedBumped
#acl SSLIntercept ssl::server_name_regex -i '/usr/local/pkg/url.bump'
#ssl_bump bump SSLIntercept
# Setup allowed ACLs
# Allow local network(s) on interface(s)
http_access allow localnet
# Default block all to be sure
http_access deny allsrc
Does anyone else have and ideas on what I did wrong? I have also tried to remove the addresses in the HTTP_PORT directive so it automatically configures, that was the same result. I have removed my MAC address matching and the terminate options same result also.
I get 409 errors on ssl bumps
> On Jul 29, 2024, at 00:17, Amos Jeffries <squid3 at treenet.co.nz> wrote:
>
> On 27/07/24 10:10, Jonathan Lee wrote:
>> Hello fellow squid users can you please help me??
>> I know I have good IPV6 internet if I use the IPV4 proxy address, and the IPv6 test sites pass 10 out of 10. If I make the client IPV6 only and have the rules set to use the proxy with the proxy IPV6 address for the proxy I get no internet.
>> I am using a IPV6 tunnel broker in pfsense. When I configure my client to IPv6 only it can access all IPv6 sites. As soon as I use the proxy address in IPv6 of Squid squid gives me the following errors...
>
> Check that ICMPv6 is working. It is mandatory when tunnels are used.
>
> Also, check the MSS and MTU values.
>
>
> Cheers
> Amos
> _______________________________________________
> squid-users mailing list
> squid-users at lists.squid-cache.org
> https://lists.squid-cache.org/listinfo/squid-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.squid-cache.org/pipermail/squid-users/attachments/20240729/444160b9/attachment-0001.htm>