[squid-users] effective acl for tcp_outgoing_address

[Hideyuki Kawai]

Hi, this is Kawai.



Now, I'm trying to set up squid4.x on centOS, but, have one issue.

Please let me send inquiry as followings.



### Requirement ###

The squid is required as follows.

1. Kerberos auth with Active Directory : auth_param .....       <- Success

2. "Security group" check which is gotten from AD : external_acl_type ...(using ext_kerberos_ldap_group_acl)   <- success

3. Using different outgoing IP based on "Security group" : tcp_outgoing_address + external_acl  <- fail (can not work)



=== sample configuration which I tested. (but, it did not work…) ===

external_acl_type kerberos_ldap_group1 ttl=3600 negative_ttl=3600 %LOGIN /path/to/ext_kerberos_ldap_group_acl −g GROUP1

external_acl_type kerberos_ldap_group2 ttl=3600 negative_ttl=3600 %LOGIN /path/to/ext_kerberos_ldap_group_acl −g GROUP2

acl group1 external kerberos_ldap_group1

acl group2 external kerberos_ldap_group2

tcp_outgoing_address 10.1.0.1 group1

tcp_outgoing_address 10.1.0.2 group2





### Inquiry ###

Based on the web site, “tcp_outgoing_address” is NOT support "external_acl". Because the external_acl type is slow.

In this case, how to configure the squid.conf to satisfy my requirement?



Please let me inform your comment and knowledge.

Thanks in advance.



-------------------------------------

h.kawai at ntt.com

-------------------------------------


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.squid-cache.org/pipermail/squid-users/attachments/20210122/77d93bc7/attachment-0001.htm>