[squid-users] Error Compiling squid-3.5.26 with libecap-1.0.1 on CentOS Linux release 7.3.1611

[L.P.H. van Belle]

Looks the same like.

http://squid-web-proxy-cache.1019090.n4.nabble.com/Compiling-squid-3-5-4-with-ecap-enabled-td4671325.html 

Greetz, 

Louis



> -----Oorspronkelijk bericht-----
> Van: squid-users 
> [mailto:squid-users-bounces at lists.squid-cache.org] Namens 
> Norbert Naveen
> Verzonden: dinsdag 13 juni 2017 16:46
> Aan: 'Alex Rousskov'; squid-users at lists.squid-cache.org
> Onderwerp: Re: [squid-users] Error Compiling squid-3.5.26 
> with libecap-1.0.1 on CentOS Linux release 7.3.1611
> 
> Hello
>   The Make output can be found at
>   https://drive.google.com/open?id=0B_dDVNpzSGEKcFlMSlBVZWs5c2c
> 
> 
>  And the output of # grep 'EXT_LIBECAP_.*=' 
> src/adaptation/ecap/Makefile EXT_LIBECAP_CFLAGS = 
> /usr/local/lib EXT_LIBECAP_LIBS = /usr/local/lib
> 
> 
>  I did the below to no effect
> make -k clean;
> ./configure  --enable-ecap
>  make > /tmp/build.log 2>&1
> 
> Build Log is available at
> https://drive.google.com/open?id=0B_dDVNpzSGEKM3JSUHNJLWJlWjA
> 
> Thanks
> Naveen
> 
> -----Original Message-----
> From: Alex Rousskov [mailto:rousskov at measurement-factory.com]
> Sent: Tuesday, June 13, 2017 2:12 AM
> To: norbert.naveen at tayana.in; squid-users at lists.squid-cache.org
> Subject: Re: [squid-users] Error Compiling squid-3.5.26 with 
> libecap-1.0.1 on CentOS Linux release 7.3.1611
> 
> On 06/12/2017 11:29 AM, Norbert Naveen wrote:
> 
> > I have attached Outputs of both Configure and Make And  libecap.pc 
> > contents are as below
> 
> Your ./configure output and libecap.pc contents look good to 
> me, but there is no sign of the eCAP library (-lecap) being 
> linked with Squid during "make". If running "make clean; 
> ./configure ...; make" does not fix this, then please find a 
> way to post a link to the _entire_ build log. Something along 
> these lines should be able to capture it:
> 
>   $ make -k clean; (./configure ...; make) > /tmp/build.log 2>&1
> 
> You may want to compress /tmp/build.log. Please post a link 
> to some public file sharing site here instead of the file 
> itself. Even compressed, it may be too big to email.
> 
> Also, what does the following command output?
> 
>   $ grep 'EXT_LIBECAP_.*=' src/adaptation/ecap/Makefile
> 
> (adjust the Makefile path if necessary if you are not 
> building Squid its source directory)
> 
> 
> Cheers,
> 
> Alex.
> 
> _______________________________________________
> squid-users mailing list
> squid-users at lists.squid-cache.org
> http://lists.squid-cache.org/listinfo/squid-users
>