[squid-users] SSL-Bump: NAT/TPROXY lookup failed to locate original IPs
Odhiambo Washington
odhiambo at gmail.com
Mon Feb 27 05:44:03 UTC 2017
On 27 February 2017 at 08:41, Test User <tuser6485 at gmail.com> wrote:
> On Mon, Feb 27, 2017 at 2:53 AM, Eliezer Croitoru <eliezer at ngtech.co.il>
> wrote:
> > Let me know if you need some help..
> >
> > Eliezer
> >
> > ----
> > Eliezer Croitoru
> > Linux System Administrator
> > Mobile: +972-5-28704261
> > Email: eliezer at ngtech.co.il
> >
> >
> > -----Original Message-----
> > From: squid-users [mailto:squid-users-bounces at lists.squid-cache.org] On
> Behalf Of Eliezer Croitoru
> > Sent: Sunday, February 26, 2017 8:51 PM
> > To: 'Test User' <tuser6485 at gmail.com>
> > Cc: squid-users at lists.squid-cache.org
> > Subject: Re: [squid-users] SSL-Bump: NAT/TPROXY lookup failed to locate
> original IPs
> >
> > Hey Michael,
> >
> > The details you attached explained pretty well the cause for the issues
> you have described.
> > What you will need to do in order to make this setup to work can be done
> in more then one way.
> > For a sysadmin the simplest way is to create a VPN or some kind of a
> tunnel between the AWS instance to the local router.
> > I am almost sure that you can use haproxy to do a local tproxy or
> interception that will forward the traffic to the remote squid with the
> PROXY protocol keeping original source and original destination visible to
> the remote squid.
> >
> > The choice will depend on both:
> > - your skills and will to dig some time about couple subjects
> > - The availability of static IP addresses(both local and AWS).
> > - The OS on both sides
> >
> > I believe that the next haproxy settings can be used as a compromise to
> a tunnel:
> > http://ngtech.co.il/paste/1605/
> > And some tproxy route and iptables rules ..
> > With a squid.conf which will be similar to:
> > acl frontend src 100.0.0.1
> > proxy_protocol_access allow frontend
> > http_port 3127
> > http_port 3128 require-proxy-header ... ssl-bump settings
> > ##END of example
> >
> > However I do still believe that the more secure way would be to use some
> kind of vpn tunnel like OpenVPN between the local router to the remote AWS
> instance.
> >
> > All The Bests,
> > Eliezer
> >
> > ----
> > Eliezer Croitoru
> > Linux System Administrator
> > Mobile: +972-5-28704261
> > Email: eliezer at ngtech.co.il
> >
> >
> > -----Original Message-----
> > From: Test User [mailto:tuser6485 at gmail.com]
> > Sent: Sunday, February 26, 2017 8:38 AM
> > To: Eliezer Croitoru <eliezer at ngtech.co.il>
> > Cc: squid-users at lists.squid-cache.org
> > Subject: Re: [squid-users] SSL-Bump: NAT/TPROXY lookup failed to locate
> original IPs
> >
> > On Sun, Feb 26, 2017 at 10:40 AM, Eliezer Croitoru <eliezer at ngtech.co.il>
> wrote:
> >> Hey Michael,
> >>
> >> You will need to clear out couple things for us.
> >> First we will need one of the next ouputs or both:
> >> iptables-save
> >> iptables -L -nv
> >>
> >> And then clear out where is this proxy sittings and the network
> structure.
> >> It's not clear if the squid box is the router or a machine somewhere on
> AWS.
> >> If you wish to pass traffic from a local router to a one on AWS you
> will need to create a tunnel like using OpenVPN or a similar solution and
> to use some routing rules to pass the traffic from the local LAN to AWS
> without removing the original destination address.
> >>
> >> When more details on the setup will be available it will be much
> simpler to understand what is the root for some of the issues you are
> having.
> >>
> >> All The Bests,
> >> Eliezer
> >>
> >> ----
> >> Eliezer Croitoru
> >> Linux System Administrator
> >> Mobile: +972-5-28704261
> >> Email: eliezer at ngtech.co.il
> >>
> >>
> >> -----Original Message-----
> >> From: squid-users [mailto:squid-users-bounces at lists.squid-cache.org]
> On Behalf Of Test User
> >> Sent: Friday, February 24, 2017 8:52 AM
> >> To: squid-users at lists.squid-cache.org
> >> Subject: [squid-users] SSL-Bump: NAT/TPROXY lookup failed to locate
> original IPs
> >>
> >> Hi,
> >> Sorry I am asking this question again. I am trying to setup HTTPS
> >> proxy using ssl-bump. I have followed
> >> steps mentioned in:
> >> http://wiki.squid-cache.org/ConfigExamples/Intercept/SslBumpExplicit
> >>
> >> Following are Squid setup details:
> >>
> >> Squid Cache: Version 3.5.12
> >> Service Name: squid
> >> Ubuntu linux
> >>
> >> configure options: '--build=x86_64-linux-gnu' '--prefix=/usr'
> >> '--includedir=${prefix}/include' '--mandir=${prefix}/share/man'
> >> '--infodir=${prefix}/share/info' '--sysconfdir=/etc'
> >> '--localstatedir=/var' '--libexecdir=${prefix}/lib/squid3'
> >> '--srcdir=.' '--disable-maintainer-mode'
> >> '--disable-dependency-tracking' '--disable-silent-rules'
> >> 'BUILDCXXFLAGS=-g -O2 -fPIE -fstack-protector-strong -Wformat
> >> -Werror=format-security -Wl,-Bsymbolic-functions -fPIE -pie
> >> -Wl,-z,relro -Wl,-z,now' '--datadir=/usr/share/squid'
> >> '--sysconfdir=/etc/squid' '--libexecdir=/usr/lib/squid'
> >> '--mandir=/usr/share/man' '--enable-inline' '--disable-arch-native'
> >> '--enable-async-io=8' '--enable-storeio=ufs,aufs,diskd,rock'
> >> '--enable-removal-policies=lru,heap' '--enable-delay-pools'
> >> '--enable-cache-digests' '--enable-icap-client'
> >> '--enable-follow-x-forwarded-for'
> >> '--enable-auth-basic=DB,fake,getpwnam,LDAP,NCSA,NIS,PAM,
> POP3,RADIUS,SASL,SMB'
> >> '--enable-auth-digest=file,LDAP'
> >> '--enable-auth-negotiate=kerberos,wrapper'
> >> '--enable-auth-ntlm=fake,smb_lm'
> >> '--enable-external-acl-helpers=file_userip,kerberos_
> ldap_group,LDAP_group,session,SQL_session,unix_group,wbinfo_group'
> >> '--enable-url-rewrite-helpers=fake' '--enable-eui' '--enable-esi'
> >> '--enable-icmp' '--enable-zph-qos' '--enable-ecap' '--with-openssl'
> >> '--enable-ssl-crtd' '--disable-translation'
> >> '--with-swapdir=/var/spool/squid' '--with-logdir=/var/log/squid'
> >> '--with-pidfile=/var/run/squid.pid' '--with-filedescriptors=65536'
> >> '--with-large-files' '--with-default-user=proxy'
> >> '--enable-build-info=Ubuntu linux' '--enable-linux-netfilter'
> >> 'build_alias=x86_64-linux-gnu' 'CFLAGS=-g -O2 -fPIE
> >> -fstack-protector-strong -Wformat -Werror=format-security -Wall'
> >> 'LDFLAGS=-Wl,-Bsymbolic-functions -fPIE -pie -Wl,-z,relro -Wl,-z,now'
> >> 'CPPFLAGS=-Wdate-time -D_FORTIFY_SOURCE=2' 'CXXFLAGS=-g -O2 -fPIE
> >> -fstack-protector-strong -Wformat -Werror=format-security'
> >>
> >>
> >> Following is my squid.conf file:
> >>
> >> acl SSL_ports port 443
> >> acl Safe_ports port 80 # http
> >> acl Safe_ports port 21 # ftp
> >> acl Safe_ports port 443 # https
> >> acl Safe_ports port 70 # gopher
> >> acl Safe_ports port 210 # wais
> >> acl Safe_ports port 1025-65535 # unregistered ports
> >> acl Safe_ports port 280 # http-mgmt
> >> acl Safe_ports port 488 # gss-http
> >> acl Safe_ports port 591 # filemaker
> >> acl Safe_ports port 777 # multiling http
> >> acl CONNECT method CONNECT
> >> acl step1 at_step SslBump1
> >> http_access deny !Safe_ports
> >> http_access deny CONNECT !SSL_ports
> >> http_access allow localhost manager
> >> http_access deny manager
> >> http_access allow localhost
> >> http_access allow all
> >> http_port 3128 ssl-bump \
> >> cert=/etc/squid/ssl_cert/squidCA.pem \
> >> generate-host-certificates=on dynamic_cert_mem_cache_size=4MB
> >> https_port 3129 intercept ssl-bump generate-host-certificates=on \
> >> dynamic_cert_mem_cache_size=4MB cert=/etc/squid/ssl_cert/squidCA.pem \
> >> dhparams=/etc/squid/ssl_cert/dhparam.pem
> >> sslproxy_options NO_SSLv2,NO_SSLv3,SINGLE_DH_USE
> >> sslproxy_cipher
> >> EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA384:
> EECDH+ECDSA+SHA256:EECDH+aRSA+SHA384:EECDH+aRSA+SHA256:
> EECDH+aRSA+RC4:EECDH:EDH+aRSA:!RC4:!aNULL:!eNULL:!LOW:!3DES:
> !MD5:!EXP:!PSK:!SRP:!DSS
> >> sslcrtd_program /usr/lib/squid/ssl_crtd -s /var/spool/squid3_ssldb -M
> 4MB
> >> debug_options ALL,1 3,5 4,5 11,5 17,5 23,5 46,5 78,5 rotate=1
> >> coredump_dir /var/spool/squid
> >> refresh_pattern ^ftp: 1440 20% 10080
> >> refresh_pattern ^gopher: 1440 0% 1440
> >> refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
> >> refresh_pattern (Release|Packages(.gz)*)$ 0 20% 2880
> >> refresh_pattern . 0 20% 4320
> >>
> >>
> >> I get no errors while starting Squid. Following are the logs when Squid
> starts:
> >>
> >> 2017/02/23 09:59:53 kid1| Set Current Directory to /var/spool/squid
> >> 2017/02/23 09:59:53 kid1| Starting Squid Cache version 3.5.12 for
> >> x86_64-pc-linux-gnu...
> >> 2017/02/23 09:59:53 kid1| Service Name: squid
> >> 2017/02/23 09:59:53 kid1| Process ID 26236
> >> 2017/02/23 09:59:53 kid1| Process Roles: worker
> >> 2017/02/23 09:59:53 kid1| With 65535 file descriptors available
> >> 2017/02/23 09:59:53 kid1| Initializing IP Cache...
> >> 2017/02/23 09:59:53.756 kid1| 78,2| dns_internal.cc(1525) dnsInit:
> >> idnsInit: attempt open DNS socket to: [::]
> >> 2017/02/23 09:59:53.756 kid1| 78,2| dns_internal.cc(1534) dnsInit:
> >> idnsInit: attempt open DNS socket to: 0.0.0.0
> >> 2017/02/23 09:59:53.756 kid1| DNS Socket created at [::], FD 6
> >> 2017/02/23 09:59:53.756 kid1| DNS Socket created at 0.0.0.0, FD 7
> >> 2017/02/23 09:59:53.756 kid1| Adding nameserver 172.31.0.2 from
> /etc/resolv.conf
> >> 2017/02/23 09:59:53.756 kid1| 78,3| dns_internal.cc(321)
> >> idnsAddNameserver: idnsAddNameserver: Added nameserver #0
> >> (172.31.0.2:53)
> >> 2017/02/23 09:59:53.756 kid1| Adding domain
> >> ap-south-1.compute.internal from /etc/resolv.conf
> >> 2017/02/23 09:59:53.756 kid1| 78,3| dns_internal.cc(350)
> >> idnsAddPathComponent: idnsAddPathComponent: Added domain #0:
> >> ap-south-1.compute.internal
> >> 2017/02/23 09:59:53.756 kid1| helperOpenServers: Starting 5/32
> >> 'ssl_crtd' processes
> >> 2017/02/23 09:59:53.775 kid1| 46,2| Format.cc(64) parse: got
> >> definition '%>a/%>A %un %>rm myip=%la myport=%lp'
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
> >> possible Misc token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
> >> possible 2C token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(389) parse: scan for
> >> possible 1C token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
> >> possible Misc token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
> >> possible 2C token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(389) parse: scan for
> >> possible 1C token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
> >> possible Misc token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
> >> possible 2C token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
> >> possible Misc token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
> >> possible 2C token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
> >> possible Misc token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
> >> possible 2C token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
> >> possible Misc token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
> >> possible 2C token
> >> 2017/02/23 09:59:53.775 kid1| 46,2| Format.cc(64) parse: got
> >> definition '%>a/%>A %un %>rm myip=%la myport=%lp'
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
> >> possible Misc token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
> >> possible 2C token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(389) parse: scan for
> >> possible 1C token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
> >> possible Misc token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
> >> possible 2C token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(389) parse: scan for
> >> possible 1C token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
> >> possible Misc token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
> >> possible 2C token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
> >> possible Misc token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
> >> possible 2C token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
> >> possible Misc token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
> >> possible 2C token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(380) parse: scan for
> >> possible Misc token
> >> 2017/02/23 09:59:53.775 kid1| 46,5| Token.cc(384) parse: scan for
> >> possible 2C token
> >> 2017/02/23 09:59:53.775 kid1| Logfile: opening log
> >> daemon:/var/log/squid/access.log
> >> 2017/02/23 09:59:53.775 kid1| Logfile Daemon: opening log
> >> /var/log/squid/access.log
> >> 2017/02/23 09:59:53.779 kid1| 23,5| url.cc(43) urlInitialize:
> >> urlInitialize: Initializing...
> >> 2017/02/23 09:59:53.779 kid1| Local cache digest enabled;
> >> rebuild/rewrite every 3600/3600 sec
> >> 2017/02/23 09:59:53.779 kid1| Store logging disabled
> >> 2017/02/23 09:59:53.779 kid1| Swap maxSize 0 + 262144 KB, estimated
> >> 20164 objects
> >> 2017/02/23 09:59:53.779 kid1| Target number of buckets: 1008
> >> 2017/02/23 09:59:53.779 kid1| Using 8192 Store buckets
> >> 2017/02/23 09:59:53.779 kid1| Max Mem size: 262144 KB
> >> 2017/02/23 09:59:53.779 kid1| Max Swap size: 0 KB
> >> 2017/02/23 09:59:53.779 kid1| Using Least Load store dir selection
> >> 2017/02/23 09:59:53.779 kid1| Set Current Directory to /var/spool/squid
> >> 2017/02/23 09:59:53.785 kid1| 23,3| url.cc(357) urlParse: urlParse:
> >> Split URL 'http://ip-172-31-25-235:3128/squid-internal-static/icons/
> silk/image.png'
> >> into proto='http', host='ip-172-31-25-235', port='3128',
> >> path='/squid-internal-static/icons/silk/image.png'
> >> 2017/02/23 09:59:53.785 kid1| 23,3| url.cc(357) urlParse: urlParse:
> >> Split URL 'http://ip-172-31-25-235:3128/squid-internal-static/icons/
> silk/page_white_text.png'
> >> into proto='http', host='ip-172-31-25-235', port='3128',
> >> path='/squid-internal-static/icons/silk/page_white_text.png'
> >>
> >> ****several urlParse logs like above. Removing them to shorten the
> >> email. Further logs below...****
> >>
> >> 2017/02/23 09:59:53.815 kid1| Finished loading MIME types and icons.
> >> 2017/02/23 09:59:53.815 kid1| HTCP Disabled.
> >> 2017/02/23 09:59:53.815 kid1| Pinger socket opened on FD 25
> >> 2017/02/23 09:59:53.815 kid1| Squid plugin modules loaded: 0
> >> 2017/02/23 09:59:53.815 kid1| Adaptation support is off.
> >> 2017/02/23 09:59:53.815 kid1| Accepting SSL bumped HTTP Socket
> >> connections at local=[::]:3128 remote=[::] FD 22 flags=9
> >> 2017/02/23 09:59:53.815 kid1| Accepting NAT intercepted SSL bumped
> >> HTTPS Socket connections at local=[::]:3129 remote=[::] FD 23 flags=41
> >> 2017/02/23 09:59:53| pinger: Initialising ICMP pinger ...
> >> 2017/02/23 09:59:53| pinger: ICMP socket opened.
> >> 2017/02/23 09:59:53| pinger: ICMPv6 socket opened
> >> 2017/02/23 09:59:54 kid1| storeLateRelease: released 0 objects
> >>
> >>
> >>
> >> I tested this setup by providing proxy details to Firefox. Firefox was
> >> able to show HTTP websites but when I tried to open an HTTPS website I
> >> got following error:
> >>
> >> 2017/02/23 11:00:50 kid1| ERROR: NF getsockopt(ORIGINAL_DST) failed on
> >> local=172.31.25.235:3129 remote=182.72.78.122:50655 FD 7 flags=33:
> >> (92) Protocol not available
> >> 2017/02/23 11:00:50 kid1| ERROR: NAT/TPROXY lookup failed to locate
> >> original IPs on local=172.31.25.235:3129 remote=182.72.78.122:50655 FD
> >> 7 flags=33
> >> 2017/02/23 11:00:50 kid1| ERROR: NF getsockopt(ORIGINAL_DST) failed on
> >> local=172.31.25.235:3129 remote=182.72.78.122:50656 FD 7 flags=33:
> >> (92) Protocol not available
> >> 2017/02/23 11:00:50 kid1| ERROR: NAT/TPROXY lookup failed to locate
> >> original IPs on local=172.31.25.235:3129 remote=182.72.78.122:50656 FD
> >> 7 flags=33
> >> 2017/02/23 11:00:50 kid1| ERROR: NF getsockopt(ORIGINAL_DST) failed on
> >> local=172.31.25.235:3129 remote=182.72.78.122:50657 FD 7 flags=33:
> >> (92) Protocol not available
> >> 2017/02/23 11:00:50 kid1| ERROR: NAT/TPROXY lookup failed to locate
> >> original IPs on local=172.31.25.235:3129 remote=182.72.78.122:50657 FD
> >> 7 flags=33
> >>
> >> I googled this error and found this mail thread which had similar
> problems:
> >> http://squid-web-proxy-cache.1019090.n4.nabble.com/NAT-
> TPROXY-lookup-failed-to-locate-original-IPs-td4675464.html
> >>
> >> I found this link from the above thread. I modified the steps for
> >> HTTPS from the below link:
> >> http://wiki.squid-cache.org/ConfigExamples/Intercept/LinuxDnat
> >>
> >> Now my sysctl.conf is:
> >>
> >> net.ipv4.conf.all.rp_filter=0
> >> net.ipv4.ip_forward = 1
> >> net.ipv4.conf.default.rp_filter = 0
> >> net.ipv4.conf.default.accept_source_route = 0
> >>
> >> My iptables -t nat -L result:
> >>
> >> Chain PREROUTING (policy ACCEPT)
> >> target prot opt source destination
> >> ACCEPT tcp -- ec2-35-154-101-8.ap-south-1.compute.amazonaws.com
> >> anywhere tcp dpt:https
> >> DNAT tcp -- anywhere anywhere tcp
> >> dpt:https to:35.154.101.8:3129
> >>
> >> Chain INPUT (policy ACCEPT)
> >> target prot opt source destination
> >>
> >> Chain OUTPUT (policy ACCEPT)
> >> target prot opt source destination
> >>
> >> Chain POSTROUTING (policy ACCEPT)
> >> target prot opt source destination
> >> MASQUERADE all -- anywhere anywhere
> >>
> >>
> >> Once this was done, I tried to hit HTTPS website from Firefox and now
> >> I get connection timeout error. Nothing shows in syslog, access.log or
> >> cache.log. Could you please help me resolve this.
> >>
> >> Thanks,
> >> Michael
> >> _______________________________________________
> >> squid-users mailing list
> >> squid-users at lists.squid-cache.org
> >> http://lists.squid-cache.org/listinfo/squid-users
> >>
> >
> >
> > Thanks for replying Eliezer. Following are the outputs you asked:
> >
> > 1. iptables-save:
> >
> > # Generated by iptables-save v1.6.0 on Sun Feb 26 06:28:46 2017
> > *filter
> > :INPUT ACCEPT [171:12090]
> > :FORWARD ACCEPT [0:0]
> > :OUTPUT ACCEPT [106:15187]
> > COMMIT
> > # Completed on Sun Feb 26 06:28:46 2017
> > # Generated by iptables-save v1.6.0 on Sun Feb 26 06:28:46 2017
> > *mangle
> > :PREROUTING ACCEPT [89003:74850371]
> > :INPUT ACCEPT [88973:74849159]
> > :FORWARD ACCEPT [30:1212]
> > :OUTPUT ACCEPT [76710:51478183]
> > :POSTROUTING ACCEPT [76740:51479395]
> > -A PREROUTING -p tcp -m tcp --dport 3129 -j DROP
> > COMMIT
> > # Completed on Sun Feb 26 06:28:46 2017
> > # Generated by iptables-save v1.6.0 on Sun Feb 26 06:28:46 2017
> > *nat
> > :PREROUTING ACCEPT [7766:436942]
> > :INPUT ACCEPT [7766:436942]
> > :OUTPUT ACCEPT [952:102330]
> > :POSTROUTING ACCEPT [0:0]
> > -A PREROUTING -s 35.154.101.8/32 -p tcp -m tcp --dport 443 -j ACCEPT
> > -A PREROUTING -p tcp -m tcp --dport 443 -j DNAT --to-destination
> > 35.154.101.8:3129
> > -A POSTROUTING -j MASQUERADE
> > COMMIT
> > # Completed on Sun Feb 26 06:28:46 2017
> >
> > 2. Also pasting sudo iptables -L -nv:
> >
> > Chain INPUT (policy ACCEPT 216 packets, 16058 bytes)
> > pkts bytes target prot opt in out source
> > destination
> >
> > Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
> > pkts bytes target prot opt in out source
> > destination
> >
> > Chain OUTPUT (policy ACCEPT 161 packets, 24629 bytes)
> > pkts bytes target prot opt in out source
> destination
> >
> >
> >
> >> And then clear out where is this proxy sittings and the network
> structure.
> >> It's not clear if the squid box is the router or a machine somewhere on
> AWS.
> >
> > [Michael] This proxy is installed on an AWS instance.
> >
> >> If you wish to pass traffic from a local router to a one on AWS you
> will need to create a tunnel like using OpenVPN or a similar solution and
> to use some routing rules to pass the traffic from the local LAN to AWS
> without removing the original destination address.
> >>
> >
> > [Michael] Does this mean, to make ssl-bump work, I will have to setup
> > a VPN server and configure the VPN clients to use this proxy via VPN
> > server?
> >
> >
> > Thanks,
> > Michael.
> >
> > _______________________________________________
> > squid-users mailing list
> > squid-users at lists.squid-cache.org
> > http://lists.squid-cache.org/listinfo/squid-users
> >
>
>
>
> Thanks for replying Eliezer. Your advice is much appreciated.
>
> > The details you attached explained pretty well the cause for the issues
> you have described.
> > What you will need to do in order to make this setup to work can be done
> in more then one way.
> > For a sysadmin the simplest way is to create a VPN or some kind of a
> tunnel between the AWS instance to the local router.
> > I am almost sure that you can use haproxy to do a local tproxy or
> interception that will forward the traffic to the remote squid with the
> PROXY protocol keeping original source and original destination visible to
> the remote squid.
> >
> > The choice will depend on both:
> > - your skills and will to dig some time about couple subjects
> > - The availability of static IP addresses(both local and AWS).
> > - The OS on both sides
>
> [Michael] Actually, my original setup involves a VPN server. I wasn't
> using it because I wanted to setup ssl-bump with simplest possible
> settings. My actual setup involves:
>
> 1. strongSwan IPSec VPN server
> 2. Squid Proxy server
> 3. Clients will be IPSec VPN clients. I can specify the IP address and
> port of HTTPS Proxy server in IPSec VPN client itself.
>
> In the above setup described, will I have to do something extra to
> make ssl-bump work?
>
> Thanks,
> Michael.
>
What is the benefit of ssl-bump in this scenario?
--
Best regards,
Odhiambo WASHINGTON,
Nairobi,KE
+254 7 3200 0004/+254 7 2274 3223
"Oh, the cruft."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.squid-cache.org/pipermail/squid-users/attachments/20170227/79c1b669/attachment-0001.html>
More information about the squid-users
mailing list