[squid-users] Squid 3.5.x install problem

[Rafael Akchurin]

Hello Secoonder and all,

Please see the following step by step tutorial how to rebuild Squid 3.5.15 (amd64) in Ubuntu 14.04 LTS - http://docs.diladele.com/tutorials/build_squid_ubuntu14/index.html. The ubuntu.diladele.com repo will be available in a week.

BTW Anyone needs the scripts to be converted to Ansible playbook?

Best regards,
Rafael Akchurin
Diladele B.V.

--
Please take a look at Web Safety - our ICAP based web filter server for Squid proxy.



-----Original Message-----
From: Rafael Akchurin 
Sent: Thursday, March 3, 2016 2:55 PM
To: squid-users at lists.squid-cache.org
Subject: Re: [squid-users] Squid 3.5.x install problem

And if you donot mind waiting a week or so - we plan to have ready to sslbump + ecap squid3 for ubuntu 14.04 at ubuntu.diladele.com repo.

Best regards,
Rafael

> Op 3 mrt. 2016 om 13:06 heeft Amos Jeffries <squid3 at treenet.co.nz> het volgende geschreven:
> 
>> On 3/03/2016 10:45 p.m., secoonder wrote:
>> Hello
>> i used debian(ubuntu 14.04)
>> I read  a lot of articles on the Internet for squid 443 enable redirection.
>> As i learned,if port 443 is active from squid,The installed needs by 
>> the compiled squid.is it true ?
> 
> Yes, The Debian and Ubuntu binary packages do not come with OpenSSL support.
> 
> 
>> am i installed apt-get install squid for 443 redirect?(80.ports 
>> redirect wasno problem,it works.the problem is 443 port)
>> 
>> i installed squid 3.5.8 package from squid-cache.And then i went to
>> squid.3.5.8 folder.
>> and then ,
>> ./configure --with-openssl --enable-ssl-crtd make make install When 
>> it was finished, i wanted to go /etc/squid folder.
>> 
>> But the /etc/squid or /etc/squid3 folder does not exit.
>> What can i do?
>> am i find step by step squid 3.5.x SSL (80 and 443 port) installation?
>> Thank you very Much
> 
> Are you aware of how to use alternative repositories with apt-get ?
> 
> There is now a 3.5 package in the Ubuntu xenial repository. You will 
> need to add that repository to your sources.list for deb and deb-src.
> 
> If you want/need eCAP you will need to build a new libecap3 and 
> libecap3-dev package for your old Ubuntu system and install those 
> before starting to build Squid:
>  apt-get -t trusty build-dep libecap
>  apt-get -t xenial -b source libecap3
>  apt-get -t xenial -b source libecap3-ev
> 
> Otherwise you will need to remove the --enable-ecap line when eiting 
> the squid package debian/rules file.
> 
> To build squid:
> apt-get -t trusty install libssl-dev
> apt-get -t trusty build-dep squid
> apt-get -t xenial -b source squid
> 
> the first time you run the build of 'squid' package should fail.
> 
> Go into the folder it creates and then the debian/ sub-folder and edit 
> the file called 'rules'.
> 
> What you are doing is adding --with-openssl to the list of Squid 
> features to build. And maybe removing the --enable-ecap if you dont 
> want do the above ecap steps.
> 
> 
> Then go back out to th directory you started in and run this command again:
>  apt-get -t xenial -b source squid
> 
> this should succeed, and the resulting package will have OpenSSL support.
> 
> Amos
> 
> _______________________________________________
> squid-users mailing list
> squid-users at lists.squid-cache.org
> http://lists.squid-cache.org/listinfo/squid-users