[squid-users] Squid 3.5.16 and vary loop objects (bug ?)

[Amos Jeffries]

On 8/04/2016 1:23 a.m., Amos Jeffries wrote:
> On 7/04/2016 1:42 a.m., joe wrote:
>> yes
>>
>> FredB wrote
>>>>
>>>> Attached is a patch which I think will fix 3.5.16 (should apply fine
>>>> on
>>>> 4.0.8 too) without needing the cache reset. Anyone able to test it
>>>> please?
>>>>
>>>
>>> Reset the cache still needed, at least in my case 
>>>
> 
> Hmm. I'm not sure why that reset would be needed. I just ran a series of
> tests with detailed debugging of the vary details being loaded from disk
> and it seems the last patch was correctly erasing the \0 terminators
> (and they were wrongly being stored).
> 
> So at least this new regression is fixed. Anything else seen in Vary is
> a separate bug.
> 
> FYI Ralf reported bug 4481 to track it. I have updated the bug with an
> explanation of the issue and applied that last patch to Squid-4 now. It
> should be in 3.5 in a day or two.
> 
And for those following this thread instead of bugzilla that 3.5 patch
is now up at
<http://www.squid-cache.org/Versions/v3/3.5/changesets/squid-3.5-14022.patch>

Amos