[squid-users] windows update not working squid 3.5.2
--Ahmad--
ahmed.zaeem at netstream.ps
Wed Sep 7 07:39:49 UTC 2016
thanks for reply
but i still don’t see even the hdd drive getting increasing when windows updates go on !!!!
i tested it on windows 7
i never seen TCP_HIT and the hdd size still the same !!!
here is again my squid.conf in final form on my server :
root at raspberrypi:~# cat /etc/squid/squid.conf
#########
acl windowsupdate dstdomain windowsupdate.microsoft.com
acl windowsupdate dstdomain .update.microsoft.com
acl windowsupdate dstdomain download.windowsupdate.com
acl windowsupdate dstdomain redir.metaservices.microsoft.com
acl windowsupdate dstdomain images.metaservices.microsoft.com
acl windowsupdate dstdomain c.microsoft.com
acl windowsupdate dstdomain www.download.windowsupdate.com
acl windowsupdate dstdomain wustat.windows.com
acl windowsupdate dstdomain crl.microsoft.com
acl windowsupdate dstdomain sls.microsoft.com
acl windowsupdate dstdomain productactivation.one.microsoft.com
acl windowsupdate dstdomain ntservicepack.microsoft.com
acl windowsupdate dstdomain au.download.windowsupdate.com
acl windowsupdate dstdomain ds.download.windowsupdate.com
acl windowsupdate dstdomain ctldl.windowsupdate.com
acl windowsupdate dstdomain .data.microsoft.com
acl windowsupdate dstdomain .l.windowsupdate.com
acl windowsupdate dstdomain .microsoft.com.akadns.net
acl windowsupdate dstdomain .deploy.akamaitechnologies.com
###################################################
acl CONNECT method CONNECT
acl wuCONNECT dstdomain www.update.microsoft.com
acl wuCONNECT dstdomain sls.microsoft.com
####################################
refresh_pattern -i windowsupdate.com/.*\.(cab|exe|ms[i|u|f|p]|[ap]sf|wm[v|a]|dat|zip|psf) 43200 80% 129600 reload-into-ims
refresh_pattern -i microsoft.com/.*\.(cab|exe|ms[i|u|f|p]|[ap]sf|wm[v|a]|dat|zip|psf) 43200 80% 129600 reload-into-ims
refresh_pattern -i windows.com/.*\.(cab|exe|ms[i|u|f|p]|[ap]sf|wm[v|a]|dat|zip|psf) 43200 80% 129600 reload-into-ims
refresh_pattern -i microsoft.com.akadns.net/.*\.(cab|exe|ms[i|u|f|p]|[ap]sf|wm[v|a]|dat|zip|psf) 43200 80% 129600 reload-into-ims
refresh_pattern -i deploy.akamaitechnologies.com/.*\.(cab|exe|ms[i|u|f|p]|[ap]sf|wm[v|a]|dat|zip|psf) 43200 80% 129600 reload-into-ims
########################################################
refresh_pattern \^ftp: 1440 20% 10080
refresh_pattern \^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320
########################################################
acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
acl localnet src fc00::/7 # RFC 4193 local private network range
acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
#
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
http_access allow CONNECT wuCONNECT localnet
http_access allow windowsupdate localnet
http_access deny !Safe_ports
# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports
# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager
# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#
# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
http_access allow localnet
http_access allow localhost
# And finally deny all other access to this proxy
http_access deny all
# Squid normally listens to port 3128
http_port 192.168.0.1:3128
# Uncomment and adjust the following to add a disk cache directory.
cache_dir ufs /var/cache/squid 20000 16 256
# Leave coredumps in the first cache dir
coredump_dir /var/cache/squid
#
# Add any of your own refresh_pattern entries above these.
#
#refresh_pattern ^ftp: 1440 20% 10080
#refresh_pattern ^gopher: 1440 0% 1440
#refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
#refresh_pattern . 0 20% 4320
#############
range_offset_limit 5 Gb windowsupdate
maximum_object_size 5 Gb
quick_abort_min -1
#########
http_port 3129 intercept
#####################
any other suggestions ???
kind regards
> On Sep 7, 2016, at 10:32 AM, L.P.H. van Belle <belle at bazuin.nl> wrote:
>
> acl windowsupdate dstdomain au.download.windowsupdate.com <http://au.download.windowsupdate.com/>
> acl windowsupdate dstdomain ds.download.windowsupdate.com <http://ds.download.windowsupdate.com/>
> acl windowsupdate dstdomain ctldl.windowsupdate.com <http://ctldl.windowsupdate.com/>
> acl windowsupdate dstdomain .data.microsoft.com <http://data.microsoft.com/>
> acl windowsupdate dstdomain .l.windowsupdate.com <http://l.windowsupdate.com/>
> acl windowsupdate dstdomain .microsoft.com.akadns.net <http://microsoft.com.akadns.net/>
> acl windowsupdate dstdomain .deploy.akamaitechnologies.com <http://deploy.akamaitechnologies.com/>
>
> and add this one to your refresh.
> refresh_pattern -i deploy.akamaitechnologies.com/.* <http://deploy.akamaitechnologies.com/.*>\.(cab|exe|ms[i|u|f|p]|[ap]sf|wm[v|a]|dat|zip|psf) 43200 80% 129600 reload-into-ims
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.squid-cache.org/pipermail/squid-users/attachments/20160907/874856ad/attachment.html>
More information about the squid-users
mailing list