[squid-users] squid ipv6 outgoing addresses from ipv4 incoming traffic

[Amos Jeffries]

I should work, I recently used exactly that type of config with a client.

Can you try to use the latest stable (3.4.8) please, and add
"debug_options, 28,3" to your squid.conf for a trace of what ACLs are
being checked.

Amos

On 8/10/2014 9:53 a.m., Ahmed Allzaeem wrote:
> I just have one final question , I want to use tcp outgoing ipv6 based on user authentication
> I mean if user A ==>ipv61
> If user B ==<ipv62
> 
> And so on ,
> Actually I had treid but no luck , I have two users (Drvirus) & (drx) all the time they go  out from 
> 
> I have configured ACL user access but not sure if im wrong !
> 
> Thos user are stored in etc/squid/squid_user I created two of them here !
> 
> So now I use port 64000 and enter users drvirusx & drx but both go out from 2a01:7e00:e000:eb::dddd
> I belkive they dhould go out from 
> 2a01:7e00:e000:eb::1111 & 2a01:7e00:e000:eb::2222
> 
> Can u have a look when u have time ???
> 
> Here is my last config
> =============
> 
> 
> auth_param basic children 20
> auth_param basic realm Linux Class
> auth_param basic program /lib/squid/basic_ncsa_auth /etc/squid/squid_user
> auth_param basic credentialsttl 2 hours
> auth_param basic casesensitive off
> ###
> acl classx proxy_auth REQUIRED
> 
> http_access allow classx
> # Recommended minimum configurat
> 
> # Squid normally listens to port 3128
> http_port xxx:64000
> #######################users acls###########
> acl drvirus note user drvirus
> acl drx note user drx
> # Uncomment and adjust th;e following to add a disk cache directory.
> #cache_dir ufs /var/cache/squid 100 16 256
> 
> # Leave coredumps in the first cache dir
> tcp_outgoing_address 2a01:7e00:e000:eb::1111 drvirus
> tcp_outgoing_address 2a01:7e00:e000:eb::2222 drx
> ===============================
>